1        Remove the 88 brake calipers
 2        Remove the brake dust shield
 3        Clean and sand the rust off the front side of the brake caliper mount.
           The new mounting brackets will be mounted on the opposite side of the spindles.
 4        The front steel outer bracket points up.
 5        Mount the new caliper adapters using the bolts provided with red lock-tite and tighten.
 6        Install thee hub centric ring
 7        Install the 13” rotor
 8        Install the 88 brake caliper and tighten to factory specs.

    9       Remove the 88 brake calipers
  10       Remove the brake dust shield
  11       Clean and sand the rust off the front side of the brake caliper mount.
             The new mounting brackets will be mounted on the opposite side of the spindles.
  12       The rear steel outer bracket points down
  13       Mount the new caliper adapters using the bolts provided with red lock-tite and tighten.
  14       Install thee hub centric ring
  15       Install the 13” rotor
  16       Install the 88 brake caliper and tighten to factory specs.