|
|
Brake kits - 12"
| Brake kit, Brembo 12" front / 12" rear (1984 - 1988) |
|
Larger view |
|
Developed for the
Kit-car enthusiast that the real Brembo brakes
for their authentic type Kit-car
This brake is designed to work with the 16"
wheels, normally found on a variety of Ferrari and Lambo kits.
Besides being authentic Brembo calipers, this brake kit has the best biasing
from front to rear over all other kits offered.
This kit has 4 piston calipers front and rear that are designed to work with
rear engine cars, adding more braking to the rear, keeping the car balanced
while braking.
This kit is equipped with individual rear, spot-type mechanical emergency
brake calipers.
This kit requires a minimum wheel diameter of 16".
(p/n BKB12128488) -
Complete Kit |
$2,750.00 |
| |
|
|
|
| |
|
|
|
 |
|
Two piece rotor upgrade
available at an additional charge for the above brake package.
This two piece package consists of rotor and hat. The rotors come
slotted. Pattern drilling is an additional charge. Call for
quote.
These rotor and hat weigh in at 10.7 lbs per unit as compared to 27 lbs for
the one piece rotor. This greatly reduces your unsprung weight.
(p/n BK1212UGR)
- Set of four |
$1,100.00 |
| Brake kit, Corvette 12" front / 12" rear (1984 - 1988) |
|
Larger view |
|
Ultimate stopping power for your High Performance
1984 - 1988 Fiero!
We incorporate the real Corvette 12 inch Rotors and front double piston
Calipers into a brake package for the Fiero that is surpassed by none. This
is the ONLY real Corvette Kit on the market that is custom designed for your
Fiero.
We have road tested this kit with superb stopping power. The larger Corvette
pads with the vented rotor gives you the ultimate security in stopping power
with minimal heating and fading compared to the standard 9.00 inch brake
system.
This is the stopping power you need, especially if you have replaced your
Engine with a larger engine. It's one thing to be able to get up to speed
with that hot power plant you have, but the security of knowing that you
can bring your Fiero back down from that speed is called peace of mind.
As these same brakes, used on a Corvette, can stop a car weighing a thousand
pounds more than the Fiero very effectively, then you can be well assured
that they will stop your Fiero.
All mounting hardware and instructions included.
This kit requires a minimum wheel diameter of 16".
(p/n BK1212v88) -
Complete Kit |
$1,784.00 |
 |
|
Our mounting hardware shown at
left is custom designed to put the pads right out to the edge of the rotor,
providing you with maximum stopping power.
Mounting hardware is available separately is you choose to purchase your own
calipers and rotors.
(p/n BK121287MH) -
mounting
hardware only |
$385.00 |
| |
|
|
|
| |
|
Core charge (Hubs, caliper, bracket)
|
$240.00 |
|
|
|
Two piece rotor upgrade
available at an additional charge for the above brake package.
This two piece package consists of rotor and hat. The rotors come
slotted. Pattern drilling is an additional charge. Call for
quote.
These rotor and hat weigh in at 10.7 lbs per unit as compared to 27 lbs for
the one piece rotor. This greatly reduces your unsprung weight.
(p/n BK1212UGR)
- Set of four |
$1,100.00 |
|
|
|
|
|
| Brake kit, Corvette 12" front / 12" rear (1988) |
|
Larger view |
|
12" vented Corvette Rotors (using stock calipers).
Vented 12 inch
Corvette C-4 rotors will add that stylish look with your 16 or 17 inch rims.
This brake upgrade will increase your stopping power by 20% better than
the stock 1988 brake system, while still using the Stock 1988 front
and rear calipers and hubs.
With these larger rotors, brake fade is minimized for peace of mind and
confidence in high-speed stopping.
This brake system will not fit the stock 15 inch wheels. The larger
16 or 17 inch wheels will have to be used with this brake rotor upgrade.
The two rings shown at the top are hub-centric rings used to align the
rotors to the Fiero hub.
This kit comes with mounting bolts shown and instructions. The stock
calipers and brake lines for the 1988 Fiero are used in this upgrade.
This kit requires a minimum wheel diameter of 16". |
|
| |
|
(p/n BKC121288) - Front and Rear Kit. |
$440.00 |
| |
|
(p/n BK12/1288MH)
-
Brake mounting hardware only.
|
$215.60 |
| |
|
|
|
|
|
|
Two piece rotor upgrade
available at an additional charge for the above brake package.
This two piece package consists of rotor and hat. The rotors come
slotted. Pattern drilling is an additional charge. Call for
quote.
These rotor and hat weigh in at 10.7 lbs per unit as compared to 27 lbs for
the one piece rotor. This greatly reduces your unsprung weight.
(p/n BK1212UGR)
- Set of four |
$1,100.00 |
|
