Brake kits - 13"
 
Brake kit, Brembo 13" front / 13" rear (1984 - 1988)
Larger view
 
Developed for the Kit-car enthusiast that the real Brembo brakes
for their authentic type Kit-car

This brake is designed to work with the 17" wheels, normally found on a variety of Ferrari and Lambo kits.

Besides being authentic Brembo calipers, this brake kit has the best biasing from front to rear over all other kits offered.

This kit has 4 piston calipers front and rear that are designed to work with rear engine cars, adding more braking to the rear, keeping the brake bias correct while braking.

This kit is equipped with individual rear, spot-type mechanical emergency brake calipers.

This kit requires a minimum wheel diameter of 17".

(p/n BKB13138488) - Complete Kit

   $2,850.00
       
       
  Two piece rotor upgrade available at an additional charge for the above brake package.

This two piece package consists of rotor and hat.  The rotors come slotted.  Pattern drilling is an additional charge.  Call for quote.

These rotor and hat weigh in at 10.7 lbs per unit as compared to 27 lbs for the one piece rotor.  This greatly reduces your unsprung weight.

(p/n BK1313UGR) - Set of four

$1,280.00


Brake kit, Vette/Viper 13" front / 13" rear (1984 - 1987)
  This brake kit has the highest stopping power of all the brake kits that we produce.  With 13" rotors, heat is dissipated much better than any other brake kit.

We incorporate 13 inch Rotors and front double piston Calipers into a brake package for the Fiero that is surpassed by none.  This is the ONLY 13" brake kit using Corvette components on the market that is custom designed for your Fiero.

This set is designed for the ultimate Fiero enthusiast who enjoys the track and autocross events.  Peace of mind is knowing that you can bring your Fiero to a stop with virtually no fade or heating from those triple digit speeds.

Rear calipers are equipped with emergency brake components, custom modified to fit the Fiero parking braking system.

All mounting hardware and instructions included.

This kit requires a minimum wheel diameter of 17".
 

 

 






larger and
installed view
 

(p/n BK131387) -Brake Kit 

$2,185.00
   

(p/n BKCC) - Core charge (Hubs, caliper, bracket)

$240.00
  Our mounting hardware shown at left is custom designed to put the pads right out to the edge of the rotor, providing you with maximum stopping power.
Mounting hardware is available separately is you choose to purchase your own calipers and rotors.

Brake caliper brackets and mounting hardware only
$384.00
   


 
  Two piece rotor upgrade available at an additional charge for the above brake package.

This two piece package consists of rotor and hat.  The rotors come slotted.  Pattern drilling is an additional charge.  Call for quote.

These rotor and hat weigh in at 10.7 lbs per unit as compared to 27 lbs for the one piece rotor.  This greatly reduces your unsprung weight.

(p/n BK1313UGR) - Set of four








$1,280.00

Installation guide for '84 - '87 Fiero

 

Brake kit, Viper 13" front / 13" rear (1988)
 
Larger and
installed view

  13" vented Rotors (using stock calipers).

Vented 13 inch rotors will add that stylish look with your minimum 17 inch rims.  This brake upgrade will increase your stopping power by 30% better than the stock 1988 brake system, while still using the Stock 1988 front and rear calipers and hubs.

With these larger rotors, brake fade is minimized for peace of mind and confidence in high-speed stopping.

The two rings shown at the top are hub-centric rings used to align the rotors to the Fiero hub.

This kit requires a minimum wheel diameter of 17".

(p/n BKV131388) - Front and Rear Kit complete

$742.00

       
       
  Our mounting hardware shown at left is custom designed to put the pads right out to the edge of the rotor, providing you with maximum stopping power.
Mounting hardware is available separately is you choose to purchase your own rotors.

(p/n BKC131388MH) - Mounting hardware 1988

$325.60
   
 
 
       
  Two piece rotor upgrade available at an additional charge for the above brake package.

This two piece package consists of rotor and hat.  The rotors come slotted.  Pattern drilling is an additional charge.  Call for quote.

These rotor and hat weigh in at 10.7 lbs per unit as compared to 27 lbs for the one piece rotor.  This greatly reduces your unsprung weight.

(p/n BK1313UGR) - Set of four



$1,280.00

Installation guide for '88 Fiero


Copyright 1999-2011 Erv Fleckstein ( West Coast Fiero ). All Rights Reserved.