 |
 |
|
|
|
|
Brembo brakes are the brakes of
choice for all the formula 1, Indy, sportsman type racing, and rally cars This Brembo brake kit is supplied with new front hubs, brackets, calipers, rotors, and mounting hardware to install on your Fiero suspension. Brackets and installation hardware are NOT sold separately. The Hubs are Fiero front Hubs with the disks machined off. These modified Hubs will increase the track width of the Fiero by 5/16" per side. The modified Hubs are required on the front only. The 1988 Fiero do not require these hubs. |
|||||
|
The Rotors used in this kit are
from the Chevrolet Corvette C4.
They are re-drilled to the Fiero 5 / 100 bolt pattern. |
||||||
|
The Calipers are aluminum, four
piston, Brembo calipers for the front and rear. The brake pads for
these calipers are readily available and are commonly used in a variety of
domestic applications. The Emergency Brake is still used on this system without modification of the cable. This kit is equipped with individual rear, spot-type mechanical emergency brake calipers. |
||||||
| Concentricity Rings are specially designed to keep the Rotors running concentric with the Hubs. | ||||||
|
|
|
Rear Brembo Brakes installed. |
 |
|
Front Brembo brake installed |
 |
| BACK |
|
Copyright © 1999-2010 Erv Fleckstein ( West Coast Fiero ). All Rights Reserved. |
