Cross Drilled Brake Rotors at West Coast Fiero

Camaro Brakes installed

Front Brake Assy. installed

This brake assembly is designed with 10-1/4 inch calipers to be able to be used with the stock Fiero and after-market 15 inch wheels. The braking power is superb, as it is the same type of braking system as is used on the Camaro, which weighs 1000 lbs. more than the Fiero.

Vented rotors help prevent heat buildup and brake fade. All the replaceable components are available from your local automotive supply. The components supplies by WCF are USA made or reconditioned (NO Chinese components here).

Our street and track testing has demonstrated no brake fade and superb stopping power.

Rear Brake Assy. installed

Shown at left is the mounted rear brake assembly, as you would find it on the Camaro. Here you will also find a 10-1/4 inch vented Rotor with factory Camaro Calipers that have been reconditioned.

These calipers are equipped with the Emergency Brake mounting hardware.
Now you can enjoy an Emergency Brake on your Fiero that really works.

All mounting hardware, not pictured, is included in the installation Kit.

Although the standard brake lines will work, we recommend the replacement of the brake lines with stainless steel braided lines.

BACK