|
Z-34 Front Brake Kit for Fiero (1984 - 1987)
|
|
|
Re-machined front Fiero Hubs
These hubs are required to mount the new Z-34 10-1/4" vented front rotors to the Fiero
front spindle. The rotors are now separate from the
hub assembly and be easily replaced without again removing the front
hubs. This upgrade will increase the track width of the front of
your Fiero by 3/8" total. |
Heavy Duty Z-34 Calipers
These 2-1/8" piston calipers are similar to those used on the
Z-34. Stock brake lines will work with this upgrade, however,
steel braided
brake lines are recommended for a better brake pedal feel.
* We offer performance Brake Pads for these calipers. |
Caliper Mounting Adapters
These custom modified Fiero front adapters couple the new calipers to the existing Fiero suspension.
Stock Fiero hardware is used for mounting these adapters. With our
Fiero adapters, no grinding or modification to the Caliper is necessary,
easily facilitating any future replacements. |
