|
|
|
| Please notice:
Each of our engine conversions under the "What it takes..." links below contain parts and labor pricing which are only provided as a guideline. Prices may change due to your particular engine conversion. Not all parts listed are absolutely necessary for your particular engine conversion. You can select any items desired for your particular conversion. |
|
V6-204 Cid, 3.4L, pushrod engine, manual transmission |
|
Required Parts |
Qty. |
WCF Part Number |
Price |
| 1/4" oil pressure line adapter ( 1/8 x 1/4 npt ) |
1 |
| $1.25 |
| Flywheel - for 1985 to 1987 models |
1 |
NP506500 | $140.00 |
| Clutch pressure plate |
1 |
p/n CL91116PP | $275.00 |
| Clutch disk Organic |
1 |
p/n CL91116DOO | $166.00 |
| Throwout bearing |
1 |
Depending on transmission | $35.00 |
| A/C belt |
1 |
| $24.00 |
| A/C refrigerant line O-Rings |
4 |
| $4.00 |
| Air Filter |
1 |
| $45.00 |
| Cam and Crank sensor plug (alum.) |
1 |
EH28CAMCSP | $24.00 |
| Conversion Gasket set |
1 set |
| $120.00 |
| Distributor Cap |
1 |
| $15.00 |
| Distributor O-Ring |
1 |
| $1.00 |
| Distributor Pick-Up Coil |
1 |
| $45.00 |
| Distributor Rotor |
1 set |
| $10.50 |
| Exhaust Gasket set |
1 |
| $14.50 |
| Fuel Filter |
1 |
| $8.00 |
| Ignition Sparkplug Wire Set |
1 set |
| $24.00 |
| Intake Manifold Gasket set |
1 |
| $20.00 |
| long block engine 3.4 |
1 |
| $2,400.00 |
| Oil Filter |
1 |
| $7.00 |
| Valve Cover Gasket Set |
1 |
| $14.00 |
| PCV valve |
1 |
| $6.00 |
| Serpentine belt |
1 |
| $120.00 |
| Spark Plugs |
1 set |
| $24.00 |
| Timing cover Gasket set |
1 |
| $20.00 |
| Water Pump |
1 |
| $95.00 |
|
|
Total |
|
Recommended Parts |
Qty. |
WCF Part Number |
Price |
| Cold Air Intake |
1 |
ISCAI | $120.00 |
| Dog-Bone Polyutherane Mount |
1 |
MFDB | $55.00 |
| Front Engine Polyutherane Mount |
1 |
MFEM8487 | $65.00 |
| Front Transmission Polyutherane Mount |
1 |
MFT8488-L | $65.00 |
| Exhaust Manifolds 1.5" stainess steel |
1 set |
H28M | $425.00 |
| Headers Exhaust -Short Tube steel- includes Y-Pipe |
1 |
p/n H2834S | $395.00 |
| Headers Exhaust -Short Tube Stainless Steel- includes Y-Pipe |
1 | p/n H2834SS | $695.00 |
| Headers Exhaust -Long Tube steel-includes Y-Pipe |
1 |
p/n H2834LS | $495.00 |
| Headers Exhaust -Long Tube Stainless Steel-includes Y-Pipe |
1 |
p/n H2834LSS | $895.00 |
| Heat/Sound Reflective Insulation |
1set |
P/N INECI | $172.00 |
| Cat Back Exhaust system |
1 |
EXCB200 | $468.00 |
| Muffler ( Spintech ) |
1 |
p/n EXMS | $143.00 |
| Left Transmission Polyutherane Mount |
1 |
MT 84-88-L | $65.00 |
| Right Transmission Polyutherane Mount |
1 |
MT84-88-R | $65.00 |
| Engine Polyutherane Mount |
1 |
MT 84-88-L | $65.00 |
|
Note: The total
recommended parts price depends on the items selected from the recommended parts list above. |
|
Total |
|
| Labor | Cost |
| Remove and Replace engine assy. | $600.00 |
| 2.8L Parts refurbishment, install onto new 3.4 | $400.00 |
| Drill 3.4 block for starter | $80.00 |
| Engine Bay Preparation -subframe, transaxle assy, corrosion control, and painting | $120.00 |
| Service transmission - change fluid w/ new filter | $120.00 |
|
Total |
| Required Parts + Labor = | |
| Required Parts + Recommended Parts + Labor = | |
| Note: Total prices listed can be more or less than the quoted price above, depending on specific customer needs. To better guess the overall price, simply deduct parts listed in the "Required Parts" section that you may not need. For instance. If you just performed a tune-up on your car, you would not need the spark plugs, plug wires, or distributor cap. You would simply deduct those prices from the overall total. |
