 |
|
|
| Please notice:
Each of our engine conversions under the "What it takes..." links below contain parts and labor pricing which are only provided as a guideline. Prices may change due to your particular engine conversion. Not all parts listed are absolutely necessary for your particular engine conversion. You can select any items desired for your particular conversion. |
|
GM, V6-231 Cid, 3.8L Naturally Aspirated or Supercharged, Manual w/o Air Conditioning |
| Required Parts to install 3800 | Qty. | WCF Part Number | Price |
| Oil filter adapter Type B If needed | 1 | ECCAOFA-B | $99.95 |
| Polyurethane front engine mount -1984 to 1987 models | 1 | MFEM8487 | $65.00 |
| Polyurethane front engine mount -1988 models | 1 | MFEM88 | $65.00 |
| 3800 Front engine mount bracket | 1 | ECMBEB3800 | |
| Polyurethane LEFT transmission mount Stick and auto | 1 | MFT8488-L | $65.00 ea |
| Polyurethane RIGHT transmission mount Stick and auto | 1 | MFT8488-R | $65.00 ea |
|
Note: Price at right is a guideline, price
is tentative and depends on customer needs. |
|||
| Additional Parts for complete install | Qty. | WCF Part Number | Price |
| Headers 3.8 Series II 1-1/2" | 1 | HDE38II15 | $755.00 |
| Cat back exhaust 2-1/2 “ | 1 | EXCB212 | $490.00 |
| Flywheel 3800 Stick | 1 | ECCAFWSII3800CI | $295.00 |
| Clutch Pressure Plate with Disc Stick | 1 | CL91116 | $570.00 |
| 3800 Dogbone with bracket | 1 | ECMBDB38000 | $140.00 |
| 3800 High Volume fuel pump (51psi @41GPH) | 1 | ECCAHFFP24 | $177.00 |
| Low Mount Alternator Bracket and Idler pulley If needed | 1 | ECCAAB | $325.00 |
| Power steering Delete Bracket If needed | 1 | ECCAPSD | $120.00 |
| A/C Delete Bracket and Pulley | $120.00 | ||
| Cold Air Intake kit | 1 | ISCAISIISC | $165.00 |
| Engine Compartment Insulation | 1 set | INSENG87 | $172.00 |
| Modified thermostat housing/ coolant fill | 1 | ECCAWTH3800 | $75.00 |
| Thermostat housing to under car coolant tube Transfer tube | 1 | ECCATT | $85.00 |
| Steel braided A/C hose, includes weld-on fittings | 1 set | ECCAAC | $140.00 |
| fuel hose, includes fittings | 1 set | ECCANFLQD | $75.00 |
| Throttle cable assembly bracket with Cruise Control | 1 | ECCATB3800II | $125.00 |
| Transmission Shifter Adapter – If Needed Automatic | 1 | ECCATSA | $120.00 |
| Water pump inlet hose | 1 | CA913 | $32.00 |
| Wiring Loom -Engine/Transmission/Sensors/ECM/ | 1 | $750.00 | |
| ECU programming starts at | 1 | $195.00 | |
| Note: The total
recommended parts price depends on the items selected from the recommended parts list above. |
|||
| As a guideline, price is tentative and dependent on customer needs. |
| Labor | Cost |
| Remove Engine assembly from vehicle | $425.00 |
| Clean Engine Bay- removal of old insulation, corrosion control, and painting. | $500.00 |
| Install Engine Insulation | $85.00 |
| Install Engine Assembly onto Fiero Cradle | $680.00 |
| Install Engine assembly into car- includes electrical, mechanical, plumbing, and transaxle connections. | $1,300.00 |
|
Total |
|
| As a guideline, price is tentative and dependent on customer needs. |
