 |
|
| Please notice:
Each of our engine conversions under the "What it takes..." links below contain parts and labor pricing which are only provided as a guideline. Prices may change due to your particular engine conversion. Not all parts listed are absolutely necessary for your particular engine conversion. You can select any items desired for your particular conversion. |
|
This list comprises most of the parts that have to be changed to install the 4.9 Cadillac engine into the Fiero. |
| 1. | Modify water outlet at intake manifold. | $ | |
| 2. | Modify shifter cable mounting bracket (4-speed). | $ | |
| 3. | Modify water fill at engine. | $ | |
| 4. | Modify clutch arm. | $ | |
| 5. | Add front engine mount. | $ | |
| 6. | Add oil cooler when needed. | $ | |
| 7. | Adapt fuel lines. | $ | |
| 8. | Modify throttle linkage. | $ | |
| 9. | Replace fan belt with part K060640 (Gates). | $ | |
| 10. | Modify oil dip stick. | $ | |
| 11. | Exchange valve covers (right to left). | $ | |
| 12. | Aluminum Cradle Mounts (set of 4). | $ | |
| 13. | Urethane Transmission Mounts (set of 2). | $ | |
| 14. | Air intake hose. | $ | |
| 15. | Modify right hand Exhaust. | $ | |
| 16. | Modify Flywheel and balance. | $ | |
| 17. | Move coil pack / add bracket. | $ | |
| 18. | Replace A/C hose with steel braided hose. | $ | |
| 19. | Modify engine electrical, including plug wires. | $ | |
| 20. | Miscellaneous hoses, clamps, etc. | $ | |
| 21. | Install Engine. | $ | |
| 22. | Exhaust System. | $ | |
| 23. | Transmission mount bracket for T460E. | $ | |
| 24. | Urethane rear transmission mount for T460E. | $ | |
| 25. | Modify Deck Lid for anternator. | $ | |
| 26. | Modify Oil Adapter for remote oil cooler. | $ | |
| 27. | Oil lines and fittings and adapters. | $ | |
| 28. | Gas shocks and brackets for Deck Lid. | $ |
|
We can
develop wiring diagrams for your particular 4.9 Cad conversion with color
code and the usage for each wire from the 4.9 Cad ECM to the fiero C500 and
C203 connector. We could offer a new wire harness for the conversion but it would be very extensive and expensive. The ECM is moved from the passenger compartment to the engine bay in the Fiero. Some cars with the 4.9 Cad (Allantra) engine have full instrumentation installed, and some do not. All 4.9 Cad ECM 's have the ability to drive full instrumentation in the Fiero. We can supply you with a wiring kit to connect the wires from the Fiero C500 and C203 connectors to the 4.9 Cad ECM. This kit consists of professional crimpers, connectors, and a wiring diagram. Optionally, send us your wire harness from both the 4.9 Cad and the original C500 and C203 connectors, and we will integrate the two for your Fiero. You also need the factory repair manual for the year and model of your 4.9 Cad engine. |
| We can provide you with the following: | ||
| CAD wiring diagram. | $ | |
| We will completely rewire your existing harness. | $ |
