Intake Systems
2.8 to 3.4 rocker arm Fiero cold air intake system
Intake Air Tube

larger view

 

This is the finest custom Cold Air Intake System for your '84 - '88 V6 Fiero.  It is made out of 2-1/2", 16 gauge Steel, matching the air intake diameter of your throttle body, and is designed to accept factory components such as Air Temperature Sensor and crank case vent.

The Air Cleaner is positioned in the fender well, just behind the air scoop.

This system will provide ample air for even the wildest 3.4 with cams, head work, and open exhaust.

Unit is shipped raw steel, ready for paint, with import air filter.

 

  (p/n ISCAI) - Cold air Intake System (import filter)    $120.00
Intake Air Tube Cold air intake intake system shipped raw steel,
ready for paint, with K & N air filter.
  $135.00


3800 Series II supercharged Fiero cold air intake system
  This is the finest custom Cold Air Intake System for your 3800 supercharged V6 Fiero.  It is made out of 3", 16 gauge Steel, matching the air intake diameter of your throttle body, and is designed to accept the stock Fiero 2.8 Air Temperature Sensor.

The Air Cleaner is positioned in the fender well, just behind the air scoop. This system will provide ample air for even the wildest 3800 with cams, head work, and open exhaust.

Unit is shipped raw steel, ready for paint, with import air filter.
 
  Cold air Intake System (import filter)    $165.00
  Chrome plating (add)    $100.00
Intake Air Tube Cold air intake intake system shipped raw steel,
ready for paint, with K & N air filter 
  $180.00



3800 Series III supercharged Fiero cold air intake system
Intake Air Tube

 

  This is the finest custom Cold Air Intake System for your 3800 supercharged V6 Fiero.  It is made out of 3", 16 gauge Steel, matching the air intake diameter of your throttle body.

The Air Cleaner is positioned in the fender well, just behind the air scoop. This system will provide ample air for even the wildest 3800 with cams, head work, and open exhaust.

Unit is shipped raw steel, ready for paint, with import air filter.
 
  (p/n ISCAISIIISC) - Cold air Intake System (import filter)    $120.00
  (p/n ISCAICP) - Chrome plating (add)    $100.00
Intake Air Tube Cold air intake intake system shipped raw steel,
ready for paint, with K & N air filter 
(p/n ISCAISIIISCW/KN) -
 

$135.00




Velocity Tube
  Eliminate the old Fiero engine intake Air Box.

Increase the air flow and horsepower of your Fiero by replacing your old, restrictive, plastic engine intake Air Box with this custom 3" diameter Velocity Tube.

Constructed out of aircraft aluminum tubing, this Velocity Tube has very low restriction and very high flow.

Utilizes stock Fiero clamps and hoses for installation.
 
 

(p/n ISVT) - Velocity tube 

  $55.00

High Performance Intake Manifold for V6  -  here! now!
  This Manifold replaces the top half of the Fiero intake manifold, effectively increasing the intake air flow by 64% and increasing efficiency for highly modified V6 and 3.4 engines.

Only slight modifications to electrical are required to accomplish this install.
1. Relocation of coil pack may be necessary and is recommended in any case for heat reduction.
2. Removing water lines to the Throttle body and blocking off.
3. Extending vacuum lines.
4. New Air intake tubing from Holly Throttle bodies to air cleaner is provided.
5. Stock Throttle cable and cruise cable are used for this installation. Fuel enrichment via Computer Chip or West Coast Fiero Piggy-back computer will be required. O2 gauge highly recommended for tuning fuel delivery.
 
  (p/n ISHPIM) - Intake manifold    $700.00
  Fuel enrichment system
Includes extra injector and Computer Controller for the 7th injector,
 (does NOT replace factory ECU).
(p/n ISFES)
 


$395.00
  Top intake plenum core charge. 
(p/n ISTPCC) -  
 
$200.00

 

Copyright 1999-2011 Erv Fleckstein ( West Coast Fiero ). All Rights Reserved.