 |
|
 |
WCF
high performance Fiero Spring kit. Developed on the race track, these springs have 300 to 400 lb/in travel and are significantly stiffer than the 200 lb/in springs of the stock Fiero. This Spring kit will drop the ride height by 1.5 inches. Spacers are available for the front if you desire less drop. Rear ride height is fully adjustable with the adjustment collar for a drop range of 2.0 inches to zero inches. The rear coil-over adjustment collars will fit stock type replacement Shocks for the Fiero (i.e. KYB, Koni, etc.). This is only Spring kit in production that has been developed for the ultra high performance Fiero. The spring perch sleeve has been designed to fit the stock type strut spring perch, thus, removal of the spring perch on the stock type Shock is not necessary. For people using 17" wheels with 245, 255 tires, this kit allows removal of part of the stock Spring Perch for tire clearance. Front springs are available seperately.
|
||||||||||||||||||||||||
|
Installed View |
|
 |
In
the customer installed view at left, Spring Perch is not cut due to tire
size being only 235. Using tires larger than 235, the spring perch
may need to be cut back for proper tire clearance. With our WCF upper hat section, the spring stays in alignment as the suspension is dropped to full extension, making it unnecessary to align spring when putting the car back on the ground, as do other coilover brands. WCF Springs are available in a variety of spring rates, from stock rates of 200 pounds to a very aggressive 400 pounds per inch, or even higher, to satisfy customer personal requirements. The Fiero stock bump stop is used in this application. Replacement bump stops are available upon request when ordering. This WCF coilover system moves the bump stop up approximately 2 inches to maintain the up wheel travel when lowering your Fiero.
|