West Coast Fiero - Hardcore Hardware

West Coast Fiero rear coil-over kit (1984 - 1988).

Coil-over picture story

Fiero Shock with Spring perch cut off to accommodate wider tires.
Black thread tube is ride height adjustment tube.
Gold colored ring is ride height adjustment ring.

Ride height adjustment tube, adjustment collar and spring mounted
on top of shock body.

Top hat keeps spring aligned when vehicle is lifted off the ground.

Stock bump-stop reinstalled at top of new shock.

Assembling Top Hat and upper mounting plate with bump-stop washer
installed.

Installing the Top Hat on top of the assembled shock.

Strut tower reassembled with Top Hat installed.

Installing the centering cup washer and Nylock nut that holds entire
Strut Tower assembly together.

Strut tower with Top Hat and upper mounting plate assembled.

Torque applied to lock nut at top of tower assembly.

Coil-over Kit.

This high quality coil-over system will increase the performance and handling of your Fiero.

Spring height is 7 inch.
Available spring rates:
     from 200 to 400 pounds per inch.

Spring rate definition:
   For every inch of spring compression, the spring pressure increases by the
   specified rate, i.e. 1 inch = 300 pounds, 2" = 600 pounds for the 300 pound
   rated spring.

We suggest 350 pounds as a aggressive spring rate for street use.

This spring is an excellent choice for 3800 Supercharged and like engines.
This kit is a MUST for Fieros with engine swaps.

Stock Spring rates can found on our drop spring page.

Installation instructions with pictures provided with kit.

BACK