West Coast Fiero - Hardcore Hardware

West Coast Fiero ultimate Sway bar system

In-line ball joint ends to replace stock rubber or standard urethane connecting links. This will significantly increase connection between suspension and the frame of the Fiero. Our system is very similar to what is used on race cars.

Rubber and urethane do not sufficiently transfer suspension travel.

In our testing of the In-line ball Joint system, we gained 2" of suspension lift transfer from one side to other through the sway bar, over the stock rubber connections.

The crush of 4 rubber connections is totally eliminated by our system.

Our end-links have been tested for up to 2700 lbs. of pull.

There is to lubrication required during the life of the joints since they pre-greased and sealed with a rubber seal. These end-links decrease the body roll by transferring the swaybar torque to the a-arms.

These links eliminate the crushing effect of the rubber or binding of the urethane previously used on the sway bar. They establishes a firmer connection between the body and the suspension.

Custom links are available for other applications.

BACK